Auto Backup Pin Function
Pins are automatically positioned, checked and fine-adjusted, reducing the time required for changeover.
Panel Height Detection
Panel warpage is detected automatically so that even very small parts can be placed with extremely high accuracy.
The AIMEX III offers dynamic exchange during production to the best tool for the job. Borderless production is made possible using the DynaHead to dynamically exchange between 12-nozzle, 4-nozzle and single nozzle tools. The DynaHead also supports specialty nozzles and mechanical chucks.
High-speed, 12 nozzle head
High-speed, high accuracy, all-purpose 4 nozzle head
High-speed, high accuracy 2 nozzle head
1608mm to 74mm x 74mm
High accuracy, single nozzle head
1608mm to 74mm x 74mm, max height 25.4 mm
Odd-form/insertion parts head, 1 nozzle or claw
1608mm to 74mm x 74mm
Tray Unit LT
The Tray Unit LT is equipped with (2) independently operated magazines, each magazine can accommodate up to (12) drawers and (2) JEDEC style trays each for a total of up to 48 unique part numbers.
Operating in a high volume environment, the two magazines can be set with duplicate set-ups allowing the machine to alternate when a part is exhausted and enabling non-stop production.
Operating in a high mix environment, the (2) independent magazines can be set-up for different job allowing the machine to operate off one while the other is in set-up, eliminating change-over time.
Dip Flux Unit Plus
Supports paste and flux
Auto material depth setting, perfect for use with your PoP applications.
Fuji Flexa Flexible Assembly Software
Our flexible solution integrates seamlessly with your production environment and boosts productivity with wizard and macro-based automation.
Fujitrax Assembly Process Management and Tracking System
The Fujitrax system was designed to assist you in raising the level of production quality for your Fuji production lines. Features include machine / parts / feeder administration, changeover support, and collection and analysis of production data in real-time, enabling quick action from operators as required.
Feeder Inspection Station
The Fuji Intelligent Feeder Inspection station is used to check and adjust the condition of the feeders in order to realize stable parts supply and high accuracy placements.
Same feeder for paper or plastic
Quick change nozzle supply system
AIMEX II - Pallet holds 45 8mm feeders (67 8mm feeders using Hexa Feeders)
AIMEX IIS - Pallet holds 65 8mm feeders (97 8mm feeders using Hexa Feeders)
Auto Head Cleaner
Our Auto Head Cleaner saves time and frees staff for other responsibilities. One of the key features of the AIMEX II / IIS / III is that the heads can be removed in seconds. The auto head cleaner takes full advantage of this by utilizing spare heads to run production while heads can be cleaned with no disruption to production.
Auto Nozzle Cleaner II
Our Auto Nozzle Cleaner II is powerful enough to clean grime sticking to the inside of nozzles! It's clean and ecological as it only uses water and compressed air.
This option tests the coplanarity of the leads and bumps. In addition to lead coplanarity, this sensor can check bump coplanarity by measuring 3D shapes.
Tray Feeder - M/L
Perfect for supplying two and four inch tray parts.
• Calibration Unit for Optimizing Load on Parts
• Hybrid Panel Support
• H04S Head - High-Speed, Medium-Sized Head
• G04Q Head - High Accuracy Head for PoP and More
• H08M Head - High-Speed, Multi-Purpose Head
• Shuttle Conveyor (STC-5060A-F, STC-5060B-F)
• Custom Nozzles and Mechanical Chucks
• Support for Various Types of Part Supply Packaging (W4, W88, W108)
• Multi Job Line Balancer
• Maintenance Tools
• Group Device Function
• Reel Holder
• Main Conveyor
• Mark Camera
• Tray Verification Function (RFID)
• Feeder Adjustment Jig
• Vibratory Stick Feeder
• Feeder Offline Verification Kit
• VUF Brush Unit Feeder Type
• Offline Head Cleaner
• Station Type Brush Unit
• Single Vibratory Stick Unit